Infiniband Cable

Mellanox 케이블 제품은 높은 대역폭의 패브릭에 적합한 비용 효율적인 솔루션으로, 네트워크를 통해 Mellanox 의 InfiniBand 및 10 / 40 기가 비트 Ethernet 어댑터 성능의 혜택을 극대화합니다. Mellanox 케이블은 IBTA 및 IEEE 표준을 준수하고 그 기준을 상회하는 성능을 달성하게 해줍니다. 모든 Mellanox 제품으로 100 % 검증되고 최적의 신호 무결성을 보장하면서, 최고의 엔드 - 투 - 엔드 성능을 제공합니다.

Mellanox 케이블을 사용하면 설치시 문제 발생율을 제로로 만들어 줍니다. Mellanox Copper 케이블은 강력한 연결을 제공하고 커넥터로부터 전원을 필요로 하지 않습니다. Mellanox 솔루션은 모든 토폴로지를 위해 장거리 확장성을 제공하며, 매우 높은 신호 무결성과 신뢰성을 활성화하는 혁신적인 광학 기술을 사용합니다.

Resources



Mellanox Copper and Optical Cables


Supporting data rates up to 56Gb/s

Mellanox cables are a cost-effective solution for connecting high bandwidth fabrics, extending the benefits of Mellanox’s high-performance InfiniBand and 10 and 40 Gigabit Ethernet adapters throughout the network. In addition to meeting or exceeding IBTA and IEEE standards, Mellanox Certified cables are 100% tested on Mellanox equipment to ensure optimal signal integrity and the best end-to-end performance. With Mellanox cables you will experience trouble-free installation and long-term operation.

Mellanox Copper Cables

Mellanox passive copper cables provide robust connections and require no power from the connector. Mellanox active cables are a thinner alternative to the passive cables, and are available in longer lengths.

Mellanox Optical Cables

Mellanox optical solutions provide long range scalability for all topologies and utilize innovative optical technologies to enable extremely high signal integrity and reliability. Mellanox assembled QSFP cables are available for short, medium and long range lengths. Mellanox SFP+ optical modules support LC-LC fiber connections for Enterprise (10GBASE-SR) or long distance (10GBASE-LR) applications.

Hybrid Copper Cables

Hybrid cables connect network equipment with different connector types. These cables can connect InfiniBand switch or HCA ports with the original microGiGaCN connector to equipment with the newer QSFP connector. Hybrid cables also enable Mellanox’s VPI adapters and 40 Gigabit Ethernet NIC to connect to 10 Gigabit Ethernet switches with either CX4 or SFP+ ports. Quad to Serial Small Form Factor Pluggable (QSA) Adapter
The Quad to Single Small Form Factor Pluggable Adapter (QSFP to SFP+ adapter or QSA) is the world’s first solution for the QSFP to SFP+ conversion challenge. The QSA enables smooth, cost-effective, connections between Virtual Protocol Interconnect® (VPI) or 40 Gigabit Ethernet adapters using contemporary QSFP ports and 1 or 10 Gigabit Ethernet networks using existing SFP or SFP+ based cabling. Similarly, Ethernet switches with 40Gb/s QSFP ports can connect to servers with 10Gb/s Ethernet NIC ports using QSA. Mellanox QSA conforms to the SFF-8431 SFP+ and SFF-8436 QSFP connector standards and is 100 percent tested to strict quality requirements. The adapter is built in QSFP form factor with a receptacle for SFP+ cable connector.

Connector Types

Mellanox cables are available with a wide range of connector types, complying with the different protocols in the market. CX4, QSFP or SFP+ cable solutions provide highest flexibility for network installations. Hybrid cables allow you to make connections when the adapter card port doesn’t match the switch port. For example, hybrid cables can connect between DDR adapters with CX4 connectors to high density switches with QSFP connectors. With a QSFP to SFP+ cable, you can connect a VPI adapter card to a 10GigE switch.

Key Features

Support for up to 40Gb/s bandwidth
Superior signal integrity
Bit Error Rate (BER) better than 10-15
Low crosstalk
Low insertion loss
Secure latching mechanism
Serial numbers printed at each end
RoHS-5 compliant
1-year warranty